Parts & Accessories
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger
3-IN-1 Handlebar Mounted Accessory Holder: 3-IN-1 Design: - Headlights - Action Cameras (GoPro) - Garmin Computers (Compatible w/ Garmin Only) - Adjustable Angle (100 Degree Tilt Up/Down) - Materials: Aluminum Alloy, Nylon - Simple Installation Specs: - Length: 105mm - Width: 68mm - Height: 57mm - Weight: 76g - Snap Ring Fitment: 31.8-32mm Bars - Max Load: 400g
Connect your PC to CycleOps VirtualTraining.
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Handlebar mount to fit Miniac 322 and 333 GPS computers. Fits up to 31.8mm round handlebars. Plastic construction with rubber shim. - Keeps handlebar clean - Adjustable height angle for better visibility during riding - Simple one bolt attachment
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black
$49.99 - $54.99
Out-front computer mount for Wahoo Elemnt computers. This is the next generation of industry-leading Wahoo Computer Mounts – stronger, easier, more versatile, and more stylish design to compliment your Wahoo and your bike. The ultimate upgrade! The advanced co-polymer Wahoo insert locks your computer in place with strength and security. Designed and tested extensively so that our replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. *Compatible with the NEW Wahoo BOLT and Wahoo Mini - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Wahoo Specific Co- Polymer - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. K-EDGE Combo Mount are NOT DESIGNED to hold a Cycliq Fly 12. (Cycliq Fly 12 users should choose the K-EDGE K13-410, K13-420, K13-2450 GO BIG camera/light mounts.) K-EDGE mounts co-polymer plastic computer inserts are designed to hold the corresponding computer ONLY (Garmin- black, WAHOO- blue, SIGMA – red), and breakaway in a crash to protect the computer body. K-EDGE Combo Mounts are designed to hold Garmin, WAHOO and SIGMA cycling computers and Go Pro, Shimano, Garmin VIRB X sized cameras and standard sized cycling lights (Light and Motion Urban or Niterider). Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.
Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
Go from wrist to bike in seconds with your Forerunner 920XT. Garmin's Quick Release Kit includes a quick release bracket, a wrist bracket, a bike mount, 2 pins, 2 screws, 6 rubber bike mount o-rings, and installation screwdrivers.
Computes and Transmits Meaningful Data - Computes and sends 6 running dynamics metrics to your compatible device - Battery life: replaceable battery lasts up to 1 year (assuming 1 hour daily use) - Automatically turns itself on and off - Tiny size: at less than 0.5 ounces, you'll forget it's there - Compatible devices connect with the Garmin Connect Mobile app to automatically sync your data and connect with others Train Hard, Run Free The Running Dynamics Pod easily clips onto your waistband to measure the running dynamics you need to beat yesterday. It gives you the option to run without a heart rate monitor chest strap. Once paired with your compatible smartwatch, just clip it to the back and center of your waistband and start your run. Review Your Form View and analyze important running metrics such as your cadence, stride length, ground contact time and balance, vertical oscillation and vertical ratio. These biomechanical measurements can help you understand your running form so you can perform better on race day. How It Works: The Running Dynamics Pod has an accelerometer in the module that measures torso movement to calculate these 6 running metrics: - Cadence is the number of steps per minute. It displays the total steps (right and left combined). - Ground contact time balance displays the left/right balance of your ground contact time while running. It displays a percentage. For example, 53.2 with an arrow pointing left or right. - Stride length is the length of your stride from 1 footfall to the next. It is measured in meters. - Vertical oscillation is your bounce while running. It displays the vertical motion of your torso, measured in centimeters for each step. - Vertical ratio is the ratio of vertical oscillation to stride length. It displays a percentage. A lower number typically indicates better running form. - Ground contact time is the amount of time in each step that you spend on the ground while running. It is measured in milliseconds.
Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation
- Control Center computer mount for any 31.8mm handlebar - Dual clamps provide superior holding power, excellent for GPS units
OEM CR2032 3V Lithium Battery used in most CatEye cycle computers.
Cadence Magnet for all CatEye computers that record cadence.
Wheel magnet for all CatEye cycle computers
Seamlessly connected. This SP Connect kit allows any smartphone case to be connected to the Intellimount Stem for a tidy dashboard on your bike. Highlights: - Fits most smartphone cases - Includes Intellimount adapter, adhesive mount and stand tool - Compatible with all SP products
Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord
The SuperBand is a tough, lightweight, and simple solution to attach virtually anything to your bike. - Fits all size smartphones with or without a case (iPhone 10/X, 11, X plus, 7, plus, 8 plus, Samsung Galaxy, Samsung Note, Google Pixel 2, Google Pixel 2 XL, OnePlus, etc.) - Easily holds down small items such as a light jacket, sunglasses, energy bars, pump, tubes, C02 cartridges, water bottle, flashlight, Bluetooth speaker, etc. - Easily attaches to the top tube, stem, or seat post using durable rubber O-rings (2 sizes included) - Can be attached to the water bottle bolts or a separate water bottle bracket - Use on a bicycle, golf cart, stroller, ATV/UTV
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Page 1 of 6 Next page